High Performance High Altitude Machine

• Max Diameter of Workpiece: 500mm
• Mass Scope of Workpiece: 900kg
• Type: Material Testing Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Model NO.: YCTL-150
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 100-500Kg
• Power Source: AC110V
• Oil Cylinder Position: Under
• Item: High Altitude Chamber
• Internal Size(W*H*D): 500W*600h*500d(mm)
• Exterior Size (W*H*D): 1210W*1600h*1250d(mm)
• Power: 3 Phase 380V 50/60Hz
• Temp Range: -70 C ~ +100c
• Humidity Range: 20%Rh ~ 95%Rh
• Temp Fluctuation: +/-1 C
• Indication Resolution: 0.01 C, +3% ~ +5%
• Temp Uniformity: +/-2 C
• Heat up and Cooling Time: 1.5 C
• Transport Package: Strong Wooden Case
• Specification: Standard size
• Trademark: Yuanyao
• Origin: Dongguan, Guangdong
• HS Code: 9031200000
• Production Capacity: 20 Sets/Month

Product Description

High performance high altitude machine


Introduction:

High altitude chamber is mainly used in aviation, aerospace, information, electronics and other fields,

instruments and meters, electric products, materials, parts equipment at the same tune ub tge low

pressure, high temperature, low temperature single or under the action of the environmental adaptability

and reliability of the test, or electric performance parameters for the speciment electricity measurement,

adopt and cimposite structure form, the test chamber is located in the front of the chamber door

vacuum unit and the electrical controller (system).


Product use:

High altitude chamber is mainly used to test the workpiece at low pressure, high temperature, low

temperature under the action of single and at the same time the environmental adaptability and

reliability of the test, and electric performance parameters for the specimen electricity measurement.


Technical spec for your reference:
 

Model	YCTL-150
Inner chamber size	500*600*500mm(W*H*D)
Exterior chamber size	1210*1600*1250mm(W*H*D)
Temperature range	Rom temperature +10ºC ~ 300ºC
Testing temperature range	-65ºC ~ +150ºC
Temperature fluctuation	±0.5ºC
Temperature accuracy	±2.0ºC
Heating up time	≤60 minutes
Cooling down time	≤45 minutes
Pressure range	Normal pressure to 0.5 kPa
Pressure control tolerance	±0.1kPa(when ≤2kPa); ±5% (when 2kPa ~ 40kPa); ±2kPa (when ≥40kPa)
Depressurization time	≤20minutes
Chamber's working environment	+5ºC ~ +35ºC, humidity ≤90%RH, 86-106kPa.
Exterior chamber material	Stainless steel + Powder voating
Interior chamber material	SUS#304 stainless steel
Insulation material	PU fiberglass wool
Air circulation system	Cooling fan
Heating system	SUS4 Stainless steel high speed heater
Humidification system	Surface evaporation system

Refrigeration system; Imported Tecumseh compressor + Fin type evaporator + air (water) cooling system.

Dehumidificatiuon system: ADP critical dew point cooling/desiccant method.

Controlling system: Digital electronic indicator SSR+ PID

Power (KW): 8KW

Requirements on water supply: Water temp ≤ 30ºC; water pressure: 0.2 ~ 0.4Mpa, flow rate: ≥10T/h

Other components: Sample *2pcs; Electrical wire*1pc (3m); pressure testing port.

Safety protection device: Over-heat protection circuit breaker, control system overload protection, overload indicator                                              lamp.
Power supply: AC 3 phase 380V 60/50Hz (If you are different, please remember to remind us.)

Customization service: Non-standard special requirements are all welcome, thanks.


By the way, we also have other models as below,

YCTL-225, inner size: 500*750*600mm(W*H*D)

YCTL-408, inner size: 600*850*800mm(W*H*D)

YCTL-800, inner size; 1000*1000*800mm(W*H*D)


Just now we will show our real product photo for you review.





My company Profile-Dongguan Yuanyoa Electronics Technology CO., Ltd 

We estabilished our own factory (Dongguan Yuanyao Electronics Technology Co., Ltd) in 2005, which has become an

importent manufacturer of environmental friendly test chambers.

Our main products include:

Temperature humidity chambers, Thermal shock test chambers, Walk-in stability test chambers, Aging chamers,

Hot air ovens, Vacuum ovens, Clean dryers, Salt spray testers, Steam aging testers, Ozone resistance test chambers,

Water test chambers, Dust proof test chamber, Vibration test machines, Drop test machines, Burning test chambers,

UV and Xenon lamp aging test chambers, Automatic dispensing machines, etc.

We have helped companies in a wide range of industry sectors including electronics components, electronics

communication, semi-comductor, electric applince and machine, spaceflight, automobile, locomotive,

telecommunication, food and pharmacy and academix institutions realize theri climate test objestives.

We will take an active role to ensure that our equipment prosoed will not only meet the specifications but also will be

made as per the budget, we also provide timely delivery.

Sincerely, we invite you to contact us and look forward to the opportunity of eastbishing a mutually benefivial, long

term business relationship with you. Thank you so much.

If you are interested in our products and want to know more, please feel free to contact me back, thanks agian.