Thermal Shock Tester (Liquid to Liquid)
Introduction&Application:
Thermal Shock Tester (Liquid to Liquid) is used to test the reliability of materials or specimens when it undergoes
a rapid change in a field or handling environment. The procedure is to cyclically immerse it in fluids which are
maintained at specific temperature. Suitable fluid materials are those that are chemically inert, stable at high
temperatures, nontoxic, noncombustible, low viscosity, and compatible with materials. Testing is conducted for a
given number of cycles, usually ending in the highest stress cold bath. After thermal shocking, the devices are
allowed to return to room temperature, then electrical tests and visual inspections are performed. The test
equipment is widely applied to detect the resistance ability of electronic, automobile, rubber, plastics, aerospace
science and technology, military technology and advanced communication equipment and other products in the
heat and cold conditon, so as to judge the reliability and stability for the products, improve the products quality
and provide the basis for the reliability.
Feature:
1 Test physical changes of IC, PCB, ceramic semiconductors and other high polymer materials.
2 High and low temperature liquid tanks use forced mixing convection way.
3 Automatically move testing samples from up to down or left to right to preheating, precooling.
4 Use Garden D02TS in hot and cold chambers to reduce the cost.
5 Japan imported LCD touch screen controller.
6 Suitable for water cooling and air cooling.
7 Optional accessories: Temp. Recorder and solution.
8 Touch screen controller
9 Best after sales service: One year free parts maintenance.
10 Meet international test standards.
11 Customization is available & welcomed.
Technical parameters:
Please see the label.
More details about the specification, please contact Vickey Huang, thanks for your attention.
Except Thermal Shock Tester (Liquid to Liquid), Dongguan Yuan Yao Electronics Technology Co., Ltd also can supply:
Precision Oven Tester, Triple Type Temp. & Humi. Chamber, Temp. &Humi. Control Host, Air Thermal Shock
Tester, Liquid Thermal Shock Tester, Salt Spray Tester, Walk-in environmental Test Room, Temp. Humi.
&Vibration Conbined Test Chamber, Aging Oven Tester, Rain/Spray Test Chamber, Burn-in test equipment, Dust
Tester, Steam Aging Tester, Vibration Tester, Tensile Tester, Drop Tester and so on.
Welcome to enquire and purchase!
| Specification |
| Model |
YTST-021-65-LW |
YIST-041-65-LW |
| Method |
Immersion in liquid bath by movement of a sample basket rack |
| Internal Dim.W×H×D(MM) |
200×350×300×2Bath |
260×350×450×2Bath |
| Temperature rise time (high temperature bath) |
Room temperature to +150ºCwithin 120 minutes |
| Temperature rise time (low tempreature bath) |
Room temperature to -65ºCwithin 120 minutes |
| Precool/Preheat Temp.Range |
-75.00ºC--00.00ºC/+600.00ºC--160.00ºC |
| Shocking Temp.Tange |
-65.00ºC--00.00ºC/+600.00ºC--150.00ºC |
| Testing Time |
5min |
5min |
| Movement Time |
Approx.10 seconds |
| Resolution |
0.1ºC/ 1 min |
| Control Constancy |
±0.2ºC |
| Sample basket Kim.W×H×D( mm ) |
10×18×20 |
16×18×35 |
| Sample Weight |
1C 2Kg |
1C 5kg |
| Controller |
1P |
| Power Source.[K.W.] |
AC 1Ψ 220V; 3Ψ 380V 50Hz |
Welcome to contact us in your free time, thanks.
Best wishes.
Ms. Vickey Huang
Audited Supplier 
){kind=link}
){kind=link}