A
STM D2436 Low Temperature Humidity Storage Room
Introduction&Application:
ASTM D2436 Low Temperature Humidity Storage Room( climatic/ climate/ environment/environmental test chambers) simulate the effects that a range of temperature and humidity conditions have on a product or material, for example telecommunications equipment or photovoltaic solar panels that are exposed to outdoor temperature and humidity conditions. They have applications in industries as disparate as food science, semiconductors, and military quality assurance. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field. Climate test chambers come in a variety of sizes, from a small box that fits on the bench top to a room-sized chamber for large objects or for testing large batches of product simultaneously. Temperature ranges from -60° C to 70° C and relative humidity ranges between 30% and 90% are available. A climate test chamber can also be used when constant climate conditions (temperature and/or humidity) are needed for product testing.
Feature:
1 Internal volume is designed according to customer's requirement.
2 Vertical forced draught mode design can evenly control any temperature and humidity conditions.
3 Stainless steel and baked enamel materials, solid structure, water-proof and good appearance.
4 Touch screen controller
5 Best after sales service: One year free parts maintenance.
6 Meet international test standards.
7 Customization is available & welcomed.
Technical data
| Model |
YWER |
| Internal Dim.W×H×D(mm) |
Please refer to size chart |
| External Dim.W×H×D(mm) |
| Temperature Range |
0ºC;-20ºC;-40ºC;-60ºC-- +70ºC(+80ºC) |
| Humidity Range |
30--90%RH |
| Ferformance |
Temp.&Humi,Constancy |
±0.3ºC;±2.5%RH |
| Temp.&Humi,Constancy |
±0.1ºC;±5%RH |
| Indication Resolution |
0.1ºC;0.1%RH/0.01;0.1%RH |
| Heat-at |
ºC |
80 |
| Time |
min |
50 |
| Pull-down |
ºC |
0 |
-20 |
-40 |
| Time |
min |
55 |
70 |
100 |
| Material |
Exterior |
SUS#304 Stainless steel/PVC+Powder Coated |
| Interior |
USU#304 stainless steel piate |
| Insulation |
Ployurethane foam 100mm (75mm) (50mm) |
| Systems |
Cirulation |
Siroco fan |
| Heating |
SUS#304 stainless steel high-speed heater |
| Humidifying |
Surface evaporating system |
| Cooling |
Airtight compressor+vaporator fins+air-cooling |
| (or water-cooling)condenser |
| Dehumidifying |
ADP Critical dewpoint cooling/dehumidifying method |
| Controller |
Digital electronic indicators+S.S.R.With PID |
| Other Components |
Airtight compressor+evaporator fins+air-cooling |
| (or water-cooling)condenser |
| Sevey Devices |
Overheating prevention ciruit-breaker, compressor overload protection,control system overload,humidifying system |
| overheating & drying out prevention, breakdown indicator light. |
| Power Source[K.W.] |
3Ψ 380V 60/50Hz |
| Comply with ASTM D2436,JIS K7212,DIN 50011,BS 2648,IEC-540. |
Our advantages:
1. Ten years factory experience, competitive price, quality warranty.
2. Provide after sales service on site to serve more customers at home and abroad.Till now, our technicists have been to HongKong, Australia, USA, UK, Singapore, Indonesia, Turkey, UAE, Pakistan and Russia for the large chamber installation and training.
3. Local agent or representatives in foreign countries:
Thailand, Pakistan, Vietnam, Belarus, Russia.
You may also interest our other products, any help, please direct contact MS Angela Cheng, I will be here to reply you within 24hours during our working time.
Audited Supplier 
){kind=link}
){kind=link}