Temperature Hot Cold Impact Test Chamber

• Customization: Available
• Type: Impact Testing Machine
• Maxcapacity: <1000KN
• Model NO.: YTST-252
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Controller
• Weight: 100-500Kg
• Power Source: AC380V
• Oil Cylinder Position: N/a
• Inner Size: 600*700*600mm with 2 Baths
• Method: Immersion in Liquid Bath by Movement
• Temp. Cooling Tme: R.T. to -65 Degrees in 120mins
• Volume: 252 Liters
• Temp. Rise Time: R.T. to 150 Degrees in 120mins
• Precool Temp. Range: -75degs-- 0 Deg, +60degs to 160degs
• Temp. Fluctuation: +/- 0.2 Degree
• Sample Weight: IC 2kg
• Preheat Temp. Range: -65deg- 0 Deg, +60degs to 150degs
• Resolution: 0.1deg/Min
• Transport Package: Strong Wood Carton
• Specification: SGS, TUV Certificate
• Trademark: Yuanyao
• Origin: China
• HS Code: 9032100000
• Production Capacity: 10 Sets/Month

Product Description

Temperature hot cold impact test chamber

Temperature hot cold impact test chamber is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, electronics among other materials.

Features

1. Equipment area is divided into three areas: High temperature, low temperature, the test area of three parts, the test product is placed in the test area, the temperature of the high temperature zone or low temperature impact area into the test area impact, test products for Static.
2. Using touch graphic control interface, easy operation, stable, safety.
3. The way of impact: Application of air duct switching temperature into test area, do the thermal shock impact test.
4. High temperature shock or low temperature impact, the maximum time up to 999H, the maximum cycle up to 9999 times.
5. The system can be used for automatic cycle engine or manual selective impact shock and cold red hot red initiate and set two or three.
6. Cooling adopt dual refrigeration system, the cooling effect of rapid cooling method for the water-cooled


Technical parameters: Please see the label.

Specification
Model	YTST-021-65-LW	YIST-041-65-LW
Method	Immersion in liquid bath by movement of a sample basket rack
Internal Dim.W×H×D(MM)	200×350×300×2Bath	260×350×450×2Bath
Temperature rise time (high temperature bath)	Room temperature to +150ºCwithin 120 minutes
Temperature rise time (low tempreature bath)	Room temperature to -65ºCwithin 120 minutes
Precool/Preheat Temp.Range	-75.00ºC--00.00ºC/+600.00ºC--160.00ºC
Shocking Temp.Tange	-65.00ºC--00.00ºC/+600.00ºC--150.00ºC
Testing Time	5min	5min
Movement Time	Approx.10 seconds
Resolution	0.1ºC/ 1 min
Control Constancy	±0.2ºC
Sample basket Kim.W×H×D( mm )	10×18×20	16×18×35
Sample Weight	1C 2Kg	1C 5kg
Controller	1P
Power Source.[K.W.]	AC 1Ψ 220V; 3Ψ 380V 60/50Hz

 

We also supply other different type environmental test chamber as below. 
 
1) Temperature/ humidity test series: Temperature humidity test chamber,  Walk in environmental room, Thermal shock test chamber,  High altitude low pressure simulation test chamber
2) Aging test series: Hot air oven, Vacuum drying oven, Air ventilation aging test chamber, Steam aging test chamber, Ozone resistance test chamber, Burn in test equipment
3) Weather simulation tes series: Rain spray test chamber, dust test chamber, Xenon lamp aging test chamber, UV test chamer 
4) Mechanical test series: High frequency vibration test machine, drop test machine , Glue dispensing machine etc.

Welcome to enquire and purchase!