Slient discharge Ozone generator Aging Cabinet
Decription:
Plasticization products high temperature cycle aging cabinet simulates the environment of high temperature atmospheric pressure environment, which is used to heat resistance test for electrical insulation, ventilation aging test of electronic parts, plasticizing product, treatment of mandatory ventilation, etc.
A plastic test is any type of test done on a sample of plastic. These tests can be used to determine the strength, flexibility, or durability of a plastic and are often used as a measure of quality control. Laboratories that offer to perform plastic tests use a variety of different machines and techniques to determine the quality of the plastic.
One common type of plastic test is a test of how the plastic holds up under different temperatures. For this type of test, a sample of the plastic is placed in a chamber where the temperature is either raised or lowered at a slow but constant rate. Engineers watch for changes in the quality of the plastic, such as expansion, breaking, melting, or contraction, depending on the specifications of the test, and note the temperature at which the change took place.
Plastics may also be tested for how durable they are under stress. One plastic test that determines durability uses a machine that bends a piece of plastic until it breaks. In another type of test, a piece of plastic may be pressed firmly between two sides of a machine until it compresses or cracks with the strain. Engineers may also use a machine that hits the sample, testing the capacity of the plastic to resist the impact and slow it down. Examining the forces used in each of these types of stress tests gives engineers information about how strong a sample of plastic is.
Some plastics that are intended for use as lenses may also undergo a plastic test that determines how the plastic interferes with light that passes through it. In one such test, a light with a specific wavelength is viewed through the sample, and the color and quality of the light is compared to the color and quality of the same wavelength of light that has not passed through a lens. Haze, or the amount of visible light that is refracted as it passes through a plastic lens, may also be tested in a similar plastic test.
For plastics that are intended for use in different types of conditions, weathering tests may also be performed. A sample can be tested to see how much water it absorbs or to see at what temperature it will catch on fire. A machine that mimics the effects of weather over a long period of time may be used in a plastic test that determines how a sample will hold up over time and exposure to the elements.
Features
1 Stainless steel SUS#304 made, easy setting operation.
2 Wing diffusion supply air circulation system, fresh air ventilation can be arbitrary adjustment.
3 Internal rotary free dismantling, suspension frame motor speed is 8-10 rpm.
4 Ventilation measurement function.
5 Optional accessories( Temp. Recorder, calibrated rack for 9 points calibration)
6 Best after sales service: One year free parts maintenance.
7 Meet international test standards.
8 Customization is available & welcomed.
Technical parameters
| Specification |
| 1Model |
YTAT-101 |
YTAT-216 |
| Internal Dim.W×H×D(mm) |
450×500×450 |
600×600×600 |
| External Dim.W×H×D(mm) |
1180×1350×750 |
1330×1450×900 |
| Temp Range |
Room temp +10ºC--300ºC |
| Features |
Temp Constancy |
±0.5ºC |
| Temp Uniformity |
±2ºC -- ±3ºC |
| lndication Resolution |
±0.1ºC |
| Heat-up Time(min) |
30 |
40 |
| Material |
Exterior |
Stainless steel plate + Powder Coated |
| Interior |
SUS # 304 stainless steel piate |
| Insulation |
Fiberglass wool |
| Systems |
Circulation |
siroco fan |
| Heating |
Chrome steel strip wire heater |
| Control |
PID electronic digital control+S.C.R |
| Other Components |
Vacuum glass observation window lighting,environmental control indicator lights |
| Experiment separation shelves,rotation experiment pams,ventilation adjusment mechanism |
| Airch ang Rate |
5 -- 200 (3 --250)times/per hour |
| Sefety Devices |
Overheating prevention circuit-breaket,control systen,breakdown indicator right |
| Power Source[K.W.] |
AC 1Ψ 220V;60/50Hz |
| 7 |
10 |
| Comply with ASTM D2436, JIS K7212, DIN 50011, BS 2648, IEC-540. |
| Air Change Rate for Standards |
| Standards |
Air Change Rate |
| JIS-K212, JIS-K6723 JIS-A5756, JIS-C3004 JIS-C3005, JIS-K6301 |
up 1 time/hr |
| ASTM-D2436, ASTM-D573 ASTM-5374, ASTM-D5423-93 |
100-200 times/hr |
| UL-746B |
100-200 times/hr |
| UL-1581.62.444 |
5-250 times/hr |
| ISO/DIS 4577 |
1 time/hr |
| BS-6746 |
8-20 times/hr |
| BS-903 |
8-20 times/hr |
| IEC-540 |
8-19 times/hr
|
Except Plasticization products high temperature cycle aging cabinet, we also can supply:
1) Temperature/ humidity test series: Temperature humidity test chamber, Walk in environmental room, Thermal shock test chamber, High altitude low pressure simulation test chamber
2) Aging test series: Hot air oven, Vacuum drying oven, Air ventilation aging test chamber, Steam aging test chamber, Ozone resistance test chamber, Burn in test equipment
3) Weather simulation tes series: Rain spray test chamber, dust test chamber, Xenon lamp aging test chamber, UV test chamer
4) Mechanical test series: High frequency vibration test machine, drop test machine , Glue dispensing machine etc.
Product detail
Yuanyao Profile
If you want tp know more about the aging test chamber,please feel free to contact me.
Welcome to enquire and purchase!
Audited Supplier 
){kind=link}
){kind=link}