Liquid Thermal Shock Tester Air Thermal Shock Tester
Introduction&Application:
Thermal Shock Tester (Liquid to Liquid) is used to test the reliability of materials or specimens when it
undergoes a rapid change in a field or handling environment. The procedure is to cyclically immerse it in
fluids which are maintained at specific temperature. Suitable fluid materials are those that are chemically
inert, stable at high temperatures, nontoxic, noncombustible, low viscosity, and compatible with materials.
Testing is conducted for a given number of cycles, usually ending in the highest stress cold bath. After
thermal shocking, the devices are allowed to return to room temperature, then electrical tests and visual
inspections are performed. The test equipment is widely applied to detect the resistance ability of
electronic, automobile, rubber, plastics, aerospace science and technology, military technology and
advanced communication equipment and other products in the heat and cold conditon, so as to judge the
reliability and stability for the products, improve the products quality and provide the basis for the reliability.
Feature:
1 Test physical changes of IC, PCB, ceramic semiconductors and other high polymer materials.
2 High and low temperature liquid tanks use forced mixing convection way.
3 Automatically move testing samples from up to down or left to right to preheating, precooling.
4 Use Garden D02TS in hot and cold chambers to reduce the cost.
5 Japan imported LCD touch screen controller.
6 Suitable for water cooling and air cooling.
7 Optional accessories: Temp. Recorder and solution.
8 Touch screen controller
9 Best after sales service: One year free parts maintenance.
10 Meet international test standards.
11 Customization is available & welcomed.
Technical parameters:
Please see the label.
More details about the specification, please contact Vickey Huang, thanks for your attention.
Except Thermal Shock Tester (Liquid to Liquid),
Dongguan Yuanyao Electronics Technology Co., Ltd also can supply:
Precision Oven Tester, Triple Type Temp. & Humi. Chamber, Temp. &Humi. Control Host, Air Thermal
Shock Tester, Liquid Thermal Shock Tester, Salt Spray Tester, Walk-in environmental Test Room, Temp.
Humi. &Vibration Conbined Test Chamber, Aging Oven Tester, Rain/Spray Test Chamber, Burn-in test
equipment, Dust Tester, Steam Aging Tester, Vibration Tester, Tensile Tester, Drop Tester and so on.
Welcome to enquire and purchase !
| Specification |
| Model |
YTST-021-65-LW |
YIST-041-65-LW |
| Method |
Immersion in liquid bath by movement of a sample basket rack |
| Internal Dim.W×H×D(MM) |
200×350×300×2Bath |
260×350×450×2Bath |
| Temperature rise time (high temperature bath) |
Room temperature to +150ºCwithin 120 minutes |
| Temperature rise time (low tempreature bath) |
Room temperature to -65ºCwithin 120 minutes |
| Precool/Preheat Temp.Range |
-75.00ºC--00.00ºC/+600.00ºC--160.00ºC |
| Shocking Temp.Tange |
-65.00ºC--00.00ºC/+600.00ºC--150.00ºC |
| Testing Time |
5min |
5min |
| Movement Time |
Approx.10 seconds |
| Resolution |
0.1ºC/ 1 min |
| Control Constancy |
±0.2ºC |
| Sample basket Kim.W×H×D( mm ) |
10×18×20 |
16×18×35 |
| Sample Weight |
1C 2Kg |
1C 5kg |
| Controller |
1P |
| Power Source.[K.W.] |
AC 1Ψ 220V; 3Ψ 380V 50Hz |
If you are interested in our products and want to know more, please feel free to contact me back, thanks.
Yours sincerely
Vickey Huang
Audited Supplier 
){kind=link}