Service available humidity thermal performance resistance test chamber
Introduction and application:
Service available humidity thermal performance resistance test chamber( climatic/ climate/ environment/environmental test chambers) simulate the effects that a range of temperature and humidity conditions have on a product or material, for example telecommunications equipment or photovoltaic solar panels that are exposed to outdoor temperature and humidity conditions. They have applications in industries as disparate as food science, semiconductors, and military quality assurance. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field. Climate test chambers come in a variety of sizes, from a small box that fits on the bench top to a room-sized chamber for large objects or for testing large batches of product simultaneously. Temperature ranges from -70° C to +150° C and relative humidity ranges between 20% and 98% are available. A climate test chamber can also be used when constant climate conditions (temperature and/or humidity) are needed for product testing.
Features:
1. Three layers design, easy to operate and saving floor area;
2. Each layer can test 3 different control conditions: high temperature, low temperature or constant temperature humidity;
3. All systems are independent: 3 sets of refrigeration system, 3 sets of heating system and humidifying system, 3 sets of control system, stable control, high precision, and long iife service.
Technical data
| Model |
YTHG-072 |
YTHG-162 |
| Inner chamber size W×H×D(cm) |
45×40×40 |
60×45×60 |
| Exterior chamber size W×H×D(cm) |
100×200×170 |
120×215×185 |
| Testing temperature range |
-70ºC,-60ºC,-70ºC,-20ºC,0ºC~150ºC,Other temperature can be customized |
| Testing humidity range |
20%RH~98%RH(Low humidity 10%RH~98%RH or 5%RH can be customized) |
| Temp.humi.fluctuation |
±0.3ºC;±0.5%RH |
| Temp.humi.uniformity |
±2ºC;±3% empty loading after stablize for 30mins ±1.5ºC; ±3%RH |
| Temp.humi.resolution |
0.01ºC;0.1%RH |
| Heating&cooling time ºC/min |
Heat-up:3ºC/min(average),cool-down:1ºC/min(average) |
| Exterior chamber material |
Cold rolled plate + Powder coating |
| Interior chamber material |
SUS#304 Stainless steel |
| Insulation material |
PU+ fiberglass wool |
| Circulation system |
Centrifugal fan air circulation system |
| Heating system |
SUS# Stainless steel high-speed heater |
| Humidification system |
Electrothermal steam humidification |
| Dehumidifying |
ADP critical dew point cooling / dehumidifying method |
| Refrigeration system |
Compressor + Finned evaporator + Air(Water) cooled condenser |
| Controlling system |
Touch screen controller+SSR+PID |
| Other components |
Vacuum glass observation window |
| Test hole(50mm),Control status indicator |
| Interior light,Compartment shelf (2 freely adjustable) |
| Safety protection device |
Humidification system overheat protection,Compressor overload protection |
| Control system overload protection,overload indicator |
| Phase sequence protection,Water shortage protection |
| High voltage and low voltage protection,Over temperature protection |
| Water supply delay protection,Fan overcurrent protection |
| Power supply |
AC 1ψ220V;3ψ380V 60/50Hz |
| Customization service |
Non-standard or special requirements are all welcome |
Welcome to inquire and visti our factory, we will provide a best service for you.
Audited Supplier 
){kind=link}
){kind=link}