Industrial Vacuum Oven High Temperature Medicine Drying Test Oven
Introduction
IThe specific process of the medicine drying oven is as follows:
After the raw materials are taken out by the centrifuge, they enter the vacuum oven for drying. The test conditions are 180ºC and -98kpa. The drying process lasts for 2 hours (the main purpose of vacuuming is to prevent the heat-sensitive materials from oxidizing and turning yellow, and to shorten the drying cycle). After the drying is completed, the raw materials will be crushed and then processed. The cooling method of the equipment is generally water cooling, and the machine should reserve drainage pipes. The top will be equipped with spray balls (which will only be activated when the raw materials undergo a chemical reaction).
Performance Feature
1. Adopt computerized electronic digital control, precise & reliable.
2. The packing of box insulation is molded by silicone, high-temperature enduring & never aged
Attached with observation view window, easy to be used.
3. Heating is by compulsory circulating ventilation, temperature raising is fast and spread even.
4. Provide the P. I. D. Control system, double sided overheating protection, safe & reliable.
5. Easy to set temperature, easier to operate.
6. Attached with two sets of movable disks to be adjusted high and low at your dispel.
Technicial parameters
| Model No. |
YVO-072 |
YVO-270 |
YVO-480 |
YVO-600 |
YVO-720 |
YVO-1000 |
| Internal chamber size (W*H*D) cm |
40×45×40 |
60×90×50 |
80×100×60 |
100×100×60 |
100×120×60 |
100×100×100 |
|
| External chamber size (W*H*D) cm |
72×116×56 |
93×163×67 |
110×172×77 |
130×172×77 |
116×170×116 |
116×150×166 |
|
| Temperature range |
RT+25ºC~200ºC(Max. 400ºC) |
| Vacuum degree |
Normal pressure to 3K Pa (Min 5 Pa can be customized) |
| Temp fluctuation |
±3%ºC |
| Control resolution |
0.1ºC |
| Heat-up time |
RT+25~200ºC<90min |
| RT+25~400ºC<120min |
| External chamber material |
Cold rolled sheet + powder coating |
| Interior chamber material |
SUS#304 Stainless steel |
| Insulation |
fiberglass wool |
| Heating system |
SUS#Stainless steel high-speed heater |
| Control system |
Button type digital display controller |
| Vacuum system |
Vacuum pump + solenoid valve + vacuum gauge |
| Power supply |
AC 3Ψ 380V 60/50Hz |
| Customazition service |
Non-standard or special requirements can be customized. |
Except Industrial Vacuum Temperature Reliablity Climate Drying Test Oven, we also can supply:
Precision Oven Tester, Triple Type Temp. & Humi. Chamber, Temp. &Humi. Control Host, Air Thermal Shock Tester, Liquid Thermal Shock Tester, Salt Spray Tester, Walk-in environmental Test Room, Temp. Humi. &Vibration Conbined Test Chamber, Aging Oven Tester, Rain/Spray Test Chamber, Burn-in test equipment, Dust Tester, Steam Aging Tester, Vibration Tester, Tensile Tester, Drop Tester and so on.
If you have any question, please feel free to contact us!
Company profile
FAQ:
Q1: Can this product be customized?
A: Yes, it can be customized according to your needs.
Q2: Production time and delivery date of the product?
A: Usually 25-30 days. (Depends on the specific project and the order quantity)
Q3: What is the packaging of the product?
A:Export-standard packaging includes inner protective materials and plywood wooden cases, which meets the environmental protection requirements for transportation.
Q4: Is there after-sales technical support?
A: We provide detailed operating instructions, online support during working hours, overseas customer questions within 48 hours to respond, and optional on-site engineer service (need to confirm the region).
Q5: Which payment methods are accepted? What are the currencies of payment?
A: L/C, Wire transfer (T/T), Paypal. You can choose to use RMB, US dollar, euro, Hong Kong Dollar and other major international currencies for settlement. (Subject to mutual agreement)
Q6: Product warranty period?
A: 12 months, except for man-made damage and consumables. (Extended warranty service is acceptable, a certain fee will be charged according to the situation)
Audited Supplier 
){kind=link}