Rapid Rate Highly Temperature Humdity Climate Test Chamber

• Certification: CE, TUV, ISO, SGS
• Warranty: 1 Year
• Power: Electronic
• Inner Chamber Size(W*H*D): 600*850*600mm
• Exterior Chamber Size (W*H*D): Depends on The Chamber Design
• Test Temperature: -20~+150 Degrees
• Model NO.: YICT-306
• Rapid-Rate Temperature Range: 0~80 Degrees
• Temp. Ramp Rate: 15 Degrees/Min
• Temp Fluctuation: +/-0.3 Degrees
• Temp. Uniformity: No More Than +/-2.0c
• Pressure Range: 0.2~3kg/Cm2
• Temp. Resolution: 0.01 Degrees
• Standard Power: AC 380V 50/60Hz
• Transport Package: Strong Wooden Case
• Specification: Standard size
• Trademark: Yuanyao
• Origin: Guangdong, China
• HS Code: 9031200000
• Production Capacity: 20 Sets/Week

Product Description

Rapid Rate Highly Temperature Humdity Climate Test Chamber


What is the HAST chamber ?

In effort to improve the reliability of products, many different industries, just to mention a few, including

semiconductor, pharmaceutical, and solar companies turn to HAST testing as a shorter alternative to THB testing.

The acronym "HAST" stands for "Highly accelerated temperature/humidity stress test" the acronym "THB" 

stands for "Temperature humidity bias". THB testing takes 1000 hours to complete, whereas HAST

testing results are available within 96-100hours. In some cases, results are available in even less than

96 hours. Due to the time saving advantage. The popularity of HAST has continuously increased in recent

years. Many companies have completely replaced THB test chamber with HAST chambers.

Highly accelerated stress test (HAST) was formulated to decrease the test time needed to get useful

results. Due to time constraints on projects, engineers look for a faster solution to learn if their product

meets the standards of their particular industry. HAST testing uses a high temperature(105ºC), high

relative humidity(about 85%), and high atmospheric pressure conditions (up to 4 atm). HAST testing

loads the speciment with heat and moisture stresses to find the concealed defects that could cause

failure for the user relying on it. In testing products for reliability. Defining the test conditions is the primary

step. A comom standard used for HAST is JEDEC JESD22-A110. Test conditions must meet application

conditions in order to make testing relevant HAST testing has also in turn become a more cost eddective alternative.




Technical spec for your reference.  
 

Item description	HAST chamber
Inner size	Φ400*500mm
External dimension	750W*1200H*750D(mm)
Temperature range	105ºC~142.9ºC
Relative humidity	65%RH~100%RH
Temperature fluctuation	≤±0.5ºC
Temperature uniformity	≤±2.0ºC
Humidity fluctuation	≤±2.5%RH
Humidity uniformity	≤±3.0%RH at 85%RH
Pressure range	About 0.2~3kg/cm²
Heating up time	55min from normal temperature to 142.9ºC
Pressure rises time	About 55min from normal pressure to 3kg/cm² (the ecternal air pressure is about 5 min)
Condition of loading	Empty load
Test standard	IEC60068-2-66; JESD22-A102-C; JESD22-A110-B; JESD22-A118; GB/T2423.40-1997
Insulation construction	1. Inner mater is SUS#304 stainless steel. 2. Exterior material: Stainless steel+power coating 3. Chamber insulation material: superfine glass wool
Inner air adjustable parts	Heater, humidifier, outlet, temperature and humidity sensor, pressure sensor.
Standard accessories	Planar emvedded handle, SUS#304 door hinge, SUS#316 shelf*2pcs, SUS#315 track*2pcs
Other parts	Safety valve, relief valve, automatic water pump, filling water solenoid valve, water pans, drain and dry vacuum pump, automatic purging pressure valve.

More information will be showing in quotation with spec sheet, thanks.

∈*******************************************************************************************************

Fast change rate temperature chamber (ESS chamber)


Application

Products in the design strength limit, uses temperature acceleration techniques (within the lower extreme

temperature cycle, the product produce altemating expansion and contraction) stress changing external

envionment, make the product of thermal stress and strain, through accelerated stress to underlie the

drawbacks of products emerge (prorential parts material defects, process defect, process defects). In order

to avoid the product inuse process, by the test of enviornmental stress and some times lead to failure, cause

unnecessary loss, to improve the product yield and reduce delivery number has a signficant effect of repair,

additional stress screen itself is a kind od process stages of the process, rather than as reliability test, so

the stress screening is 100%, the procedures of the product.


Our technical specification
 

Model

YICT-225

YICT-306

YICT-408

YICT-800

YICT-1000

Inner chanber size W*H*D(mm)

500*750*600

600*850*600

600*850*800

1000*1000*800

1000*1000*1000

Exterior chanber size W*H*D(mm)

1500*1930*1550

1600*2030*1550

1600*2030*1750

2100*2280*1950

2100*2280*1950

Temperature Range

-70degrees to150degrees(KS);-40degrees to150degrees(KL); +20degrees to150degrees(KR)

Temperature rapid change range

-70degrees model:-50 to+85degrees(KS), -40degrees model:-20degrees to+85degrees(KL), -20degrees model:0degrees to+85degrees(KR)

Heating & cooling Range

3degrees/min,5degrees/min,8degrees/min,10degrees/min, 15degrees/min linear or nonliear

Performance

Temperature control accuracy

±2.0degrees

Temperature uniformity

±1.5degrees

Temperature resolution

0.01degrees

Heat-up time

-70degrees to-150degrees<60min;-40degrees to-150degrees<50min; +20degrees to-150degrees<35min

Cool-down time

+20degrees to-70degrees<70min;+20degrees to-40degrees<55min; +20degrees to-20degrees<35min

Material

Exterior chamber material

Stainless steel plate+Powder Coated

Interior chamber material

SUS#304stainless steel plate

Insulation

PU & Fiberglass wool

System

Wind Circulation

Sirocco fan

Heating system

SUS#304 stainless steel high-speed heater

Cooling

Imported compressor, finned type evaporator, air-cooling condenser

Other components

Vacuum glass inspection window, cable port(60mm),control status indicator lights, chamber lamp, loading shelves(2pcs for free)

Safety Devices

Overheating circuit-breaker, compressor overload protection,  control system overload protection,humidifying system overheating  protection, breakdow indicator light

Power supply

AC 3∮380V 60/50Hz

Customization

Customization of inner chamber size,  temperature & humidity range etc.

Machine features

Eequipped with plat no-counterforce door handles, easy operation.

Imported multifunctional special temperature controller with excellent expansibility, easy operation & easy to understand, stable and reliable controlling, excellent choice for both low temperature and ultralow temperature testing.