Electronic printed circuit board Laboratory Industrial Temperature Humidity Chamber
It is used for material perfomance test under different environment ,such as heat ,cold ,moisture,heat and moisture ,mainly applied in electronics,electriacl appliance ,mobile phones,communication,instruments,vehicles ,plastic products ,metals foos ,chemicals ,building materials,medical aerospace and other insudteries.
Features
1Touch screen controller ,different languages interface
2Automatic water filling (optional)
3Access to PC remote control and monitoring
4Independent water and electricity system
Test standard:
GBT18488.1-2006 Electric Motors and Controllers for Electric Vehicles, Part 1: Technical Conditions;
GBT18488.2-2006 Electric motor and its controller for electric vehicles, Part 2: Test methods;
ISO 16750-2006 Road vehicles: Environmental conditions and tests for electrical and electronic equipment;
ISO 20653-2006 Protection class of road vehicles, protection of electrical equipment against foreign objects, water and contact;
QCT-413-2002 Basic technical conditions for automotive electrical equipment;
GBT 2423.01-2008 Environmental Testing of Electrical and Electronic Products Part 2 Test Methods Test A: Low temperature;
GBT 2423.02-2008 Environmental testing of electrical and electronic products Part 2 Test methods Test B: high temperature;
GBT 2423.03-2006 Environmental Testing of Electrical and Electronic Products Part 2 Test Methods Test Cab: Constant Damp Heat Test;
GBT 2423.04-2008 Environmental testing of electrical and electronic products Part 2 Test methods Test Db: alternating damp heat (12h+12h cycle);
GBT 2423.17-2008 Environmental testing of electrical and electronic products Part 2 Test methods Test Ka Salt spray;
GBT 2423.18-2012 Environmental testing Part 2 Test methods Test Kb: salt spray, alternating (sodium chloride solution);
GBT 2423.37-2006 Environmental testing of electrical and electronic products - Part 2: Test methods Test L Sand and dust test;
GBT 2423.34-2012 Environmental Testing Part 2 Test Methods Test ZAD: Temperature and humidity combined cycle test;
GBT 2423.56-2006 Environmental testing of electrical and electronic products - Part 2: Test methods - Test Fh : Broadband random vibration (digital control) and guideline tests.
High temperature storage condition test:
Put the test sample into the temperature chamber, let the temperature in the chamber rise (1°C/min) to 105°C or 85°C (water-cooled model 105°C, air-cooled to 85°C), and keep for 48h.
Lower the temperature (1°C/min) to normal atmospheric conditions, and recover for 1 hour under these conditions. The cooling time in the chamber is not included in the recovery time.
Test reference curve:
Low temperature storage condition test:
Put the test sample into the chamber, make the temperature in the chamber drop to -40°C, keep it for 24h, and the temperature rise and fall rate is 1°C/min. Raise the temperature to normal atmospheric conditions, and recover under these conditions for 1 hour. The heating time in the box is not included in the recovery time.
Test reference curve:
Technical parameters
| Model |
YTH-080 |
YTH-150 |
YTH-225 |
YTH-408 |
YTH-800 |
YTH-1000 |
| inner chamer size W*H*D(cm) |
40*50*40 |
50*60*50 |
60*75*50 |
80*85*60 |
100*100*80 |
100*100*100 |
| Exterior chamer size W*H*D(cm) |
60*50*108 |
60*150*120 |
80*165*125 |
100*175*140 |
120*195*160 |
120*195*190 |
| Testing temperature range |
-70.-60ºC,-40ºC,0ºC-150ºC other termperature other temperature can becustomized |
| Testing humidity range |
20%RH-98%RH(low humidity10%RH-98%or5%RH-98%RH can be customized) |
| Temp.humi.fluctuation |
±0.5;±1%RH |
| Temp.humi.uniformity |
±2ºC,±3%RH±2ºC(empty loading test after stablize for 30 min) |
| Tem .humi.resolution |
0.01ºC;0.1%RH |
| Heating &cooling time ºC/min |
Heat-up;3ºC/min(anverage),cool-down;1ºC(average) |
| inner chamer material |
SUS#304 Stainless steel |
| Exterior chamer material |
Cold rolled plate +powder coating |
| Insulation material |
PU+fiberglass wool |
| Circulation system |
Centrifugal fan air circulation system |
| Heating system |
SUS# stainless steel hight-speed heater |
| Humidification system |
Electrothermal steam humidification |
| Dehumidififying |
ADP critical dew point cooling/dehumidifying method |
| Refrigeation system |
Compressor +Finned evaporator+Air (water)cooling condenser |
| contorlling system |
Touch screnn controller |
| other components |
vacuum glass observation window |
| Test hole(50mm) |
| Control status indicator |
| View light |
| 2pcs loading indicator |
| Safety protsction device |
Overheat protection circuit breaker |
| humidification overload protection |
| Compressor overload pretection |
| Control system overload protection |
| overload indicator |
| Phase sequence protection |
| Water shortage protection |
| High voltage and low voltage protection |
| over temperature protection |
| Water supply delay protection |
| Fan overcurrent protection |
| Power supply |
AC1 220V;380V 60/50Hz |
| Customization service |
Non -standard requierments is available |
In addition to Automatic control laboratory industrial Temperature Humidity Chamber, we also produce:
1) Temperature/ humidity test series: Temperature humidity test chamber, Walk in environmental room, Thermal shock test chamber, High altitude low pressure simulation test chamber
2) Aging test series: Hot air oven, Vacuum drying oven, Air ventilation aging test chamber, Steam aging test chamber, Ozone resistance test chamber, Burn in test equipment
3) Weather simulation tes series: Rain spray test chamber, dust test chamber, Xenon lamp aging test chamber, UV test chamer
4) Mechanical test series: High frequency vibration test machine, drop test machine , Glue dispensing machine etc.
Mainly products
Company profile
FQA
1.Do you offer after-sales service?
Every machine from our factory has a 12-month warranty after shipment. If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary.
2.Do you accept customization service?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements.
3.Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
4.Why choose Gangdong yuanyao ?
We are the factory with own team .we can provide you the reliable quality products while with reasonable price.
5.How about your packing and shipmemt
products wold be coverd with pe film then put them into the standard wooden case,By Sea or Air are aviailable.
Welcome to enquire and purches
Audited Supplier 
){kind=link}
){kind=link}