High Low temperature & humidity environmental test chambers
Temperature & humidty environmental test chamber is used to test and store a wide range of products in specific temperature and/or humidity conditions. Applications include, but are not limited to, shelf life testing, stability testing, expiration date testing, accelerated aging and other testing for pharmaceutical, packaging, life science, personal care, medical, bio-medical storage, research, and more.
Features
1. The content can be enlarged or narrowed according to user's environmental requirement.
2. Combined board, convenient to assemble and disassemble, simple structure.
3. Use pollution-free freezing medium R404, R23.
4. Capacious and brightly observation window with high light indoor explosion-proof, whitch allowed users to observe all indoor at any time.
5. Omni-directional safety protection device and power-off memory, ensure the safety of machine itself and users.
6. Winds blow out of the ceiling, whitch can reduce the influence of the wind indoor to the sample, and can also meet the demand of low wind speed and high degree of uniformity. The machine can contact to the computer, recorder(optional).
Test standard:
GBT18488.1-2006 Electric Motors and Controllers for Electric Vehicles, Part 1: Technical Conditions;
GBT18488.2-2006 Electric motor and its controller for electric vehicles, Part 2: Test methods;
ISO 16750-2006 Road vehicles: Environmental conditions and tests for electrical and electronic equipment;
ISO 20653-2006 Protection class of road vehicles, protection of electrical equipment against foreign objects, water and contact;
QCT-413-2002 Basic technical conditions for automotive electrical equipment;
GBT 2423.01-2008 Environmental Testing of Electrical and Electronic Products Part 2 Test Methods Test A: Low temperature;
GBT 2423.02-2008 Environmental testing of electrical and electronic products Part 2 Test methods Test B: high temperature;
GBT 2423.03-2006 Environmental Testing of Electrical and Electronic Products Part 2 Test Methods Test Cab: Constant Damp Heat Test;
GBT 2423.04-2008 Environmental testing of electrical and electronic products Part 2 Test methods Test Db: alternating damp heat (12h+12h cycle);
GBT 2423.17-2008 Environmental testing of electrical and electronic products Part 2 Test methods Test Ka Salt spray;
GBT 2423.18-2012 Environmental testing Part 2 Test methods Test Kb: salt spray, alternating (sodium chloride solution);
GBT 2423.37-2006 Environmental testing of electrical and electronic products - Part 2: Test methods Test L Sand and dust test;
GBT 2423.34-2012 Environmental Testing Part 2 Test Methods Test ZAD: Temperature and humidity combined cycle test;
GBT 2423.56-2006 Environmental testing of electrical and electronic products - Part 2: Test methods - Test Fh : Broadband random vibration (digital control) and guideline tests.
High temperature storage condition test:
Put the test sample into the temperature chamber, let the temperature in the chamber rise (1°C/min) to 105°C or 85°C (water-cooled model 105°C, air-cooled to 85°C), and keep for 48h.
Lower the temperature (1°C/min) to normal atmospheric conditions, and recover for 1 hour under these conditions. The cooling time in the chamber is not included in the recovery time.
Test reference curve:
Low temperature storage condition test:
Put the test sample into the chamber, make the temperature in the chamber drop to -40°C, keep it for 24h, and the temperature rise and fall rate is 1°C/min. Raise the temperature to normal atmospheric conditions, and recover under these conditions for 1 hour. The heating time in the box is not included in the recovery time.
Test reference curve:
Technical parameters
| Model |
YTH |
| Internal Dim.W×H×D(mm) |
60*75*50CM;80*172*181CM |
| External Dim.W×H×D(mm) |
| Temperature Range |
0ºC;-20ºC;-40ºC;-60ºC-- +70ºC(+80ºC) |
| Humidity Range |
20--90%RH |
| Ferformance |
Temp.&Humi,Constancy |
±0.3ºC;±2.5%RH |
| Temp.&Humi,Constancy |
±0.1ºC;±5%RH |
| Indication Resolution |
0.1ºC;0.1%RH/0.01;0.1%RH |
| Material |
Exterior |
SUS#304 Stainless steel/PVC+Powder Coated |
| Interior |
USU#304 stainless steel piate |
| Insulation |
Ployurethane foam 100mm (75mm) (50mm) |
| Systems |
Cirulation |
Siroco fan |
| Heating |
SUS#304 stainless steel high-speed heater |
| Humidifying |
Surface evaporating system |
| Cooling |
Airtight compressor+vaporator fins+air-cooling |
| (or water-cooling)condenser |
| Dehumidifying |
ADP Critical dewpoint cooling/dehumidifying method |
| Controller |
Digital electronic indicators+S.S.R.With PID |
| Other Components |
Airtight compressor+evaporator fins+air-cooling |
| (or water-cooling)condenser |
| Sevey Devices |
Overheating prevention ciruit-breaker, compressor overload protection,control system overload,humidifying system |
| overheating & drying out prevention, breakdown indicator light. |
| Power Source[K.W.] |
AC 1Ψ 220V;3Ψ 380V 60/50Hz |
Production Line:
We have independent workshops, they are consist of material bending and welding area, machine assemble area, electric system area, cooling system area ,testing and finished product area.
We produce in strict accordance with international safety standard.
Many stock spare parts in warehouse ensure customer can get soon when they need.
Yuanyao profile
We also supply other different type environmental test chamber as below.
1) Temperature/ humidity test series: Temperature humidity test chamber, Walk in environmental room, Thermal shock test chamber, High altitude low pressure simulation test chamber
2) Aging test series: Hot air oven, Vacuum drying oven, Air ventilation aging test chamber, Steam aging test chamber, Ozone resistance test chamber, Burn in test equipment
3) Weather simulation tes series: Rain spray test chamber, dust test chamber, Xenon lamp aging test chamber, UV test chamer
4) Mechanical test series: High frequency vibration test machine, drop test machine , Glue dispensing machine etc.
More details about the specification, please contact me soon, thanks for your attention.
Audited Supplier 
){kind=link}