Customization: | Available |
---|---|
Power Supply: | 3 Phase 380V 50Hz |
Certification: | CE |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Model | YTST-050 | YTST-080 | YTST-108 | YTST-216 | YTST-252 |
Test zone size W×H×D(cm) | 36×35×40 | 50×40×40 | 60×40×45 | 60×60×60 | 60×70×60 |
Exterior chamber size W×H×D (cm) | 128x182x205 | 142x192x205 | 152x192x210 | 215x213x205 | 215x223x205 |
Hot zone temp. range | +60ºC ~ +200ºC | ||||
Cold zone temp. range | -10ºC~-40ºC,-10ºC~-60ºC,-10ºC~-70ºC | ||||
Test zone temp. range | -40ºC~+150ºC,-55ºC~+150ºC,-60ºC~+150ºC | ||||
Temp. fluctuation | ±2ºC | ||||
Temp. recovery time | <5min | ||||
Specimen transfer time | within 15 seconds | ||||
Heating&cooling time ºC/min | Average 3 ºC/min for heating, 1ºC/min for cooling ( empty) | ||||
Exterior material | Cold rolled plate + Powder coating | ||||
Internal tank | Stainless steel plant #304 | ||||
Insulation | PU+Fiberglass wool | ||||
Heating system | Stainelss steel high temp. heater | ||||
Cooling system | Compressor + Finned evaporator + Air(Water) cooled condenser | ||||
Controller | Touch LCD ++ SSR + PID | ||||
Accessories | Vacuum glass observation window Power test hole (50mm) Control status indicator Interior light Load shelf (2 freely adjustable) |
||||
Protection | Overheat protection circuit breaker Compressor overload protection Control system overload protection Overload indicator Phase sequence protection High voltage and low voltage protection Over temperature protection Fan overcurrent protection |
||||
Power supply | AC 3Ψ380V 60/50Hz | ||||
Customization | Special requirements, custom service |