Air To Air Type High Low Temperature Shock Test Chamber
Introduction&Application:
Air To Air Type High Low Temperature Shock Test Chamber is used to test the reliability of materials or specimens when it undergoes a rapid change in a field or handling environment. The procedure is to cyclically immerse it in fluids which are maintained at specific temperature. Suitable fluid materials are those that are chemically inert, stable at high temperatures, nontoxic, noncombustible, low viscosity, and compatible with materials. Testing is conducted for a given number of cycles, usually ending in the highest stress cold bath. After thermal shocking, the devices are allowed to return to room temperature, then electrical tests and visual inspections are performed. The test equipment is widely applied to detect the resistance ability of electronic, automobile, rubber, plastics, aerospace science and technology, military technology and advanced communication equipment and other products in the heat and cold conditon, so as to judge the reliability and stability for the products, improve the products quality and provide the basis for the reliability.
Feature:
1 Test physical changes of IC, PCB, ceramic semiconductors and other high polymer materials.
2 High and low temperature liquid tanks use forced mixing convection way.
3 Automatically move testing samples from up to down or left to right to preheating, precooling.
4 Use Garden D02TS in hot and cold chambers to reduce the cost.
5 Japan imported LCD touch screen controller.
6 Suitable for water cooling and air cooling.
7 Optional accessories: Temp. Recorder and solution.
8 Touch screen controller
9 Best after sales service: One year free parts maintenance.
10 Meet international test standards.
11 Customization is available & welcomed.
Technical parameters: Please see the label.
| Model |
YTST-056 |
YTST-087 |
YTST-126 |
| Test zone size W*H*D(mm) |
400*350*440 |
500*350*500 |
600*350*600 |
| Exterior chamber size W*H*D(mm) |
1500*2050*2120 |
1600*2050*2220 |
1700*2050*2320 |
| Preheat temperature range |
+200ºC |
| Precool temperature range |
-60ºC -75ºC |
| Test temperature range |
+60ºC~+150ºC; -10ºC~-50ºC;-10ºC~-65ºC |
| Performance |
Temperature fluctuation |
±2ºC |
| Temperature recover time |
Within 5 minutes |
| Heat up time |
ºC |
150 |
150 |
150 |
| min |
30 |
35 |
40 |
| Cool down time |
ºC |
-50 -65 |
-50 -65 |
-50 -65 |
| min |
60 70 |
70 80 |
80 90 |
| Material |
Exterior chamber material |
Stainless steel plate+ Power Coated |
| Inner chamber material |
SUS#304 stainless steel plate |
| Insulation |
PU& Fiberglass wool |
| System |
Wind Circulation |
Sirocco fan |
| Heating system |
SUS#304 stainless steel high-speed heater |
| Cooling |
Imported compressor, finned type evaporator, air-cooling condenser |
| Controller |
LCD touch panel controller |
| Other Components |
Vaccum glass inspection window, cable port(50mm), control status
indicator lights, chamber lamp,loading shelves(2pcs for free) |
| Safty Devices |
Overheating circuit-breaker,compressor overload protection,control
system overload protection, humidifying system overheating protection,
beakdown indicator light |
| Power Supply |
AC3∮380V 60/50Hz |
| Customization |
Customization of inner chamber size, tempreture&humidity range,ect. |
Except High Low Temperature Shock Test Chamber, Dongguan Yuan Yao Electronics Technology Co., Ltd also can supply:
1) Temperature/ humidity test series: Temperature humidity test chamber, Walk in environmental room, Thermal shock test chamber, High altitude low pressure simulation test chamber
2) Aging test series: Hot air oven, Vacuum drying oven, Air ventilation aging test chamber, Steam aging test chamber, Ozone resistance test chamber, Burn in test equipment
3) Weather simulation tes series: Rain spray test chamber, dust test chamber, Xenon lamp aging test chamber, UV test chamer
4) Mechanical test series: High frequency vibration test machine, drop test machine , Glue dispensing machine etc.
Welcome to enquire and purchase!
Audited Supplier 
){kind=link}